Computational Fluid Dynamics Based Models for Assessing UV Reactor Design and Installation

Abstract

Assesses the effectiveness of computational fluid dynamics (CFD) modeling for evaluating UV disinfection processes and determines sensitivity of UV disinfection performance (UV dose response) to parameters, hydraulic configurations, and operational conditions. Also provides guidance and protocols regarding CFD modeling that will facilitate potential future regulatory acceptance within the context of the USEPA's UV Disinfection Guidance Manual (UVDGM). Research partner: Sandia National Laboratories. Published in 2011.

Resources

Public Plus

Computational Fluid Dynamics Based Models for Assessing UV Reactor Design and Installation

Report

#4107

03/22/2011

View Executive Summary

Related Projects

Recently

Project #4010

Water Treatment Residuals Management for Small Systems

Completed

Critically evaluates treatment, disposal, and beneficial use options for residuals from small water treatment plants, or low volume generators, considering the resource issues (e.g., economic and staffing) unique...

View more details

Project #3075

DBP Control in High Bromide Water While Using Free Chlorine During Distribution

Completed

Evaluates integration and potential synergies among GAC adsorption, MIEX® resin, and fixed-bed ion exchange. Determines the performance of combinations of these processes, regeneration frequencies, residuals disposal requirements, and...

View more details

Project #4421

Development of Action Spectra Correction Factors for UV Inactivation of Cryptosporidium

Completed

The goal of this project was to provide a safe interim solution to the newly identified issues around medium pressure UV validation procedures. The solution aims to allow...

View more details

Project #5011

Evaluation and Life Cycle Comparison of Ex-Situ Treatment Technologies for Poly- and Perfluoroalkyl Substances (PFAS) in Groundwater

In Progress

The objective of this research was to assess the effectiveness of GAC adsorption, IX, and membrane processes for the removal of PFAS from different source waters and quantify...

View more details

Project #5211

Understanding the Value Proposition for Thermal Processes to Mitigate PFAS in Biosolids

In Progress

As per- and polyfluoroalkyl substances (PFAS) have dramatically shifted the biosolids management landscape, utility managers lack options for dealing with PFAS. Currently, the use of thermal processes has...

View more details

Project #5258

Treatment Strategies for the Removal of Lithium from Drinking Water

In Progress

Lithium is a naturally occurring mineral that is present in natural waters at concentrations likely ranging from 1 µg/L to more than 300 µg/L. A recent survey of...

View more details

Your Water System is Not Isolated - Interdependencies are Important

Computational Fluid Dynamics Based Models for Assessing UV Reactor Design and Installation

Abstract

Resources

Computational Fluid Dynamics Based Models for Assessing UV Reactor Design and Installation

Water Treatment Residuals Management for Small Systems

DBP Control in High Bromide Water While Using Free Chlorine During Distribution

Development of Action Spectra Correction Factors for UV Inactivation of Cryptosporidium

Evaluation and Life Cycle Comparison of Ex-Situ Treatment Technologies for Poly- and Perfluoroalkyl Substances (PFAS) in Groundwater

Understanding the Value Proposition for Thermal Processes to Mitigate PFAS in Biosolids

Treatment Strategies for the Removal of Lithium from Drinking Water

Your Water System is Not Isolated - Interdependencies are Important